Industrial Public Address Telephone

SMART PA TELEPHONE is a multi location operating telephone unit by construction with built in PUBLIC ADDRESS system. This phone has a built in amplifier, which is connected to external loudspeaker horn and works on either 220 volts AC or 110 Volts AC. One has to just lift the telephone handset of any extension, dial the extension number of PA Telephone and after the call matures automatically, make necessary announcement. The communication between the calling party and the called party is in private mode, when the called party lifts the handset.

SMART PA TELEPHONE disconnects automatically if the calling party disconnects the call. The announcement is made at specified location only and not all over the plant and at any time more than one person can make announcement on different PA telephone sets. Incoming call from the PA telephone is like normal telephone call, just lift the receiver and dial the

SMART PILFER PROOF PA TELEPHONE is HANDSFREE version (VANDAL RESISTANT TYPE) of   SMART PA TELEPHONE which is multi location-operating unit by construction with built in PUBLIC ADDRESS system. This unit has a built in amplifier, which is connected to external loudspeaker horn and internal speaker. It works on either 220 V AC or 110 V AC.  Dial the EXTN number of PA Telephone, Telephone activates automatically, make the necessary announcement.


SMART PILFER PROOF PA TELEPHONE disconnects itself automatically if the calling party disconnects the call.
The communication between the calling party and the called party is established when the called party acknowledges by pressing the connect button and speaks by pressing the PTT. Incoming call from the PA telephone is like normal telephone call, just press the connect button and dial the required extension and talk by pressing the PTT switch.

SMART WEATHER PROOF PA TELEPHONE (WMHS-IIWP)is a weather proof version of  PA TELEPHONE  which  is a multiple role; multiple location operating telephone unit by construction with built in public address system, works as a normal telephone as well as a page phone unit. This phone has a built in amplifier, which is connected to external loudspeaker horn and works on either 220 volts AC or 110 Volts AC. One has to just lift the telephone handset of any extension, dial the extension number of PA Telephone and after the call matures automatically, make necessary announcement. The communication between the calling party and the called party is in private mode, when the called party lifts the handset.



SMART WEATHER PROOF PA TELEPHONE (WMHS-IIWP) disconnects automatically if the calling party disconnects the call. The announcement is made at specified location only and not all over the plant and at any time more than one person can make announcement on different PA telephone sets. Incoming call from the PA telephone is like normal telephone call, just lift the receiver and dial the required extension. It is essential for growing organisations because of its unique features and is proposed to be used in conjunction with SMART MASTER CONTROL STATION (MODEL MCS-II) OR WITH PLANT EPABX ( The backbone of every establishments communication. )

SMART DESK TOP PA TELEPHONE (DTHS-IIC)is a DESK TOP indoor model of PA TELEPHONE which is a multiple role; multiple location operating telephone unit by construction with built in public address system, works as a normal telephone as well as a page phone unit. This phone has a built in amplifier, which is connected to external loudspeaker horn and works on either 220 volts AC or 110 Volts AC. One has to just lift the telephone handset of any extension, dial the extension number of PA Telephone and after the call matures automatically, make necessary announcement. The communication between the calling party and the called party is in private mode, when the called party lifts the handset.



SMART DESK TOP PA TELEPHONE (WMHS-IIC) disconnects automatically if the calling party disconnects the call. The announcement is made at specified location only and not all over the plant and at any time more than one person can make announcement on different PA telephone sets. Incoming call from the PA telephone is like normal telephone call, just lift the receiver and dial the required extension. It is essential for growing organisations because of its unique features and is proposed to be used in conjunction with SMART MASTER CONTROL STATION (MCS-II)OR WITH PLANT EPABX ( The backbone of every establishments communication. )

PA - Handset Type ( MODEL WMHS-II )


SMART PA TELEPHONE (WMHS-II) is a multiple role, multiple location operating telephone unit by construction with built in public address system. Works as a normal telephone as well as a page phone unit . This phone has a built in amplifier, which is connected to external loudspeaker horn and works on either 220 volts AC or 110 Volts AC. One has to just lift the telephone handset of any extension, dial the extension number of PA Telephone and after the call matures automatically, make necessary announcement. The communication between the calling party and the called party is in private mode, when the called party lifts the handset.

The SMART PA TELEPHONE (WMHS-II) disconnects automatically if the calling party disconnects the call. The announcement is made at specified location only and not all over the plant and at any time more than one person can make announcement on different PA telephone sets. Incoming call from the PA telephone is like normal telephone call, just lift the receiver and dial the required extension.It is essential for growing organisations because of its unique features and is proposed to be used in conjunction with SMART MASTER CONTROL STATION(MCS-II)OR WITH PLANT EPABX ( The backbone of every establishments communication. )

OPERATIONS:-

    TO MAKE A CALL:-

    • Lift the handset, hear the dial tone.
    • Dial desired extension number & communicate.
    • Dial desired extension number.
    • Replace handset to disconnect active call.

    INCOMING CALL:-

    • From any phone dial the extension number of SMART PA TELEPHONE. It will connect automatically and acknowledge with a BEEP TONE.
    • Announce after the hearing the BEEP TONE.
    • Communication will be in PRIVATE MODE when called party lifts the receiver.
    • Replacing the receiver on cradle will reset the SMART PA TELEPHONE.

ACCESSORIES AND OPTION:-

  • External Loudspeaker Horn.
  • Color selection. ( subject to minimum quantities. )
  • Customized dial plates with FLASH & RESET SWITCH.

VERSATILE APPLICATIONS:-

  • Cement Plants.
  • Mines.
  • Petrochemical Refineries.
  • Chemical Plants.
  • Construction Sites.
  • Steel Plants.
  • Spinning Yarns
  • Fertilizer Plants.
  • Sugar Mills.
  • Power Generation Facilities
  • Pulp & Paper Mills
  • Food Processing Plant
  • Warehouses
  • Recreation Facilities
  • Hydroelectric Facilities
  • Drilling Rigs
  • Ammonia Storage Area
  • Process industries
  • ANY LARGE AND MEDIUM SCALE INDUSTRIAL UNITS.

SMART CHOICE: -

  • Simple Installation.
  • Simple Operation.
  • One piece waterproof non tactile keypad.
  • Magnetic reed hook-switch reduces moving parts subject to wear.
  • 16 gauge rugged steel powder coated construction.
  • Heavy industrial ABS handset & SS cord.
  • Noise canceling microphone.
  • Auto disconnect to free line for next call.
  • A service temperature range from 0 to +60 o C.
  • Encapsulated circuit boards impervious to water and condensation.
  • Environment Protected.
  • Single PCB design for plug n play operation.
  • Easy troubleshooting insuring minimum downtime.
  • Two units can be connected in parallel to one extension.

PA - Vandal Resistant Type ( MODEL WMHF-II )

SMART PILFER PROOF PA TELEPHONE (WMHF-II) is HANDSFREE version (VANDAL RESISTANT TYPE) of SMART PA TELEPHONE which is multi location-operating unit by construction with built in PUBLIC ADDRESS system. This unit has a built in amplifier, which is connected to external loudspeaker horn and internal speaker. It works on either 220 V AC or 110 V AC. Dial the EXTN number of PA Telephone, Telephone activates automatically, make the necessary announcement.

SMART PILFER PROOF PA TELEPHONE (WMHF-II) disconnects itself automatically if the calling party disconnects the call.

The communication between the calling party and the called party is established when the called party acknowledges by pressing the connect button and speaks by pressing the PTT

Incoming call from the PA telephone is like normal telephone call, just press the connect button and dial the required extension and talk by pressing the PTT switch.

OPERATIONS: -

TO MAKE A CALL: -

  • Press the connect button, hear the dial tone.
  • Dial desired extension number.
  • Communicate with the press to talk and release to listen button.
  • Reset by pressing the release button to disconnect the active call.

INCOMING CALL: -

  • From any phone dial the extension number of SMART PILFER PROOF PA TELEPHONE (WMHF-II). It
    will connect automatically and acknowledge with a BEEP TONE
  • Announce after the hearing the BEEP TONE
  • Communication will be established when the called party presses the connect button
  • Use Push to Talk (PTT) button for communication
  • Reset by pressing the release button

VERSATILE APPLICATIONS: -

  • Cement Plants
  • Paper Mills. Mines
  • Petrochemical Refineries
  • Chemical Plants.
  • Construction Sites
  • Steel Plants
  • Spinning Yarns
  • Fertilizer Plants
  • Sugar Mills
  • ANY LARGE AND MEDIUM SCALE INDUSTRIAL UNITS

ACCESSORIES AND OPTIONS: -

  • Color selection (subject to minimum quantities)
  • All other accessories are supplied as per specific requirements

SMART CHOICE: -

  • Simple Installation.
  • Simple Operation.
  • 16-gauge steel enclosure with powder coat finish
  • One-piece waterproof non-tactile keypad.
  • Noise-canceling type microphone.
  • Auto disconnect to free line for next call.
  • A service temperature range from 0 to +60 o C.
  • Environment Protected.
  • Encapsulated circuit boards impervious to water and condensation
  • Single PCB design for plug & play operation
  • Easy troubleshooting ensuring minimum downtime.

Weather Proof Type (MODEL WMHS-IIWP)

SMART WEATHER PROOF PA TELEPHONE (WMHS-IIWP) is a multiple role; multiple location operating telephone unit by construction with built in public address system, works as a normal telephone as well as a page phone unit. This phone has a built in amplifier, which is connected to external loudspeaker horn and works on either 220 volts AC or 110 Volts AC. One has to just lift the telephone handset of any extension, dial the extension number of PA Telephone and after the call matures automatically, make necessary announcement. The communication between the calling party and the called party is in private mode, when the called party lifts the handset.

SMART WEATHER PROOF PA TELEPHONE (WMHS-IIWP) disconnects automatically if the calling party disconnects the call. The announcement is made at specified location only and not all over the plant and at any time more than one person can make announcement on different PA telephone sets. Incoming call from the PA telephone is like normal telephone call, just lift the receiver and dial the required extension. It is essential for growing organisations because of its unique features and is proposed to be used in conjunction with SMART MASTER CONTROL STATION (MODEL MCS-II) OR WITH PLANT EPABX ( The backbone of every establishments communication. )

OPERATIONS: -

TO MAKE A CALL: -

  • Lift the handset, hear the dial tone.
  • Dial desired extension number & communicate.
  • Replace handset to disconnect active call.

INCOMING CALL: -

  • From any phone dial the extension number of SMART PA TELEPHONE. It will connect automatically and acknowledge with a BEEP TONE.
  • Announce after the hearing the BEEP TONE.
  • Communication will be in PRIVATE MODE when called party lifts the receiver.
  • Replacing the receiver on cradle will reset the SMART PA TELEPHONE.

VERSATILE APPLICATIONS: -

  • Cement Plants.
  • Mines.
  • Petrochemical Refineries.
  • Chemical Plants.
  • Construction Sites.
  • Steel Plants.
  • Spinning Yarns
  • Fertilizer Plants.
  • Sugar Mills.
  • Power Generation Facilities
  • Pulp & Paper Mills
  • Food Processing Plant
  • Warehouses
  • Recreation Facilities
  • Hydroelectric Facilities
  • Drilling Rigs
  • Ammonia Storage Area
  • Process industries
  • ANY LARGE AND MEDIUM SCALE INDUSTRIAL UNITS.

ACCESSORIES AND OPTIONS: -

  • External Loudspeaker Horn.
  • Color selection (subject to minimum quantities).

SMART CHOICE: -

  • Simple Installation.
  • Simple Operation.
  • One-piece waterproof non-tactile keypad.
  • Magnetic reed hook-switch reduces moving parts subject to wear.
  • AL ALLOY CASTING BODY WITH INTEGRATED CANOPY WITH powder coated construction.
  • Heavy industrial ABS handset & SS cord.
  • Noise-canceling type microphone.
  • Auto disconnection to free line for next call.
  • A service temperature range from 0 to +60 o C.
  • Encapsulated circuit boards impervious to water and condensation.
  • Environment Protected.
  • Single PCB design for plug & play operation.
  • Easy troubleshooting ensuring minimum downtime.

Desk Top Type (MODEL DTHS-IIC)

SMART DESK TOP PA TELEPHONE (DTHS-IIC) is a multiple role; multiple location operating telephone unit by construction with built in public address system, works as a normal telephone as well as a page phone unit. This phone has a built in amplifier, which is connected to external loudspeaker horn and works on either 220 volts AC or 110 Volts AC. One has to just lift the telephone handset of any extension, dial the extension number of PA Telephone and after the call matures automatically, make necessary announcement. The communication between the calling party and the called party is in private mode, when the called party lifts the handset.

SMART DESK TOP PA TELEPHONE (DTHS-IIC) disconnects automatically if the calling party disconnects the call. The announcement is made at specified location only and not all over the plant and at any time more than one person can make announcement on different PA telephone sets. Incoming call from the PA telephone is like normal telephone call, just lift the receiver and dial the required extension. It is essential for growing organisations because of its unique features and is proposed to be used in conjunction with SMART MASTER CONTROL STATION (MCS-II)OR WITH PLANT EPABX ( The backbone of every establishments communication. )

OPERATIONS: -

TO MAKE A CALL: -

  • Lift the handset, hear the dial tone.
  • Dial desired extension number & communicate.
  • Replace handset to disconnect active call.

INCOMING CALL: -

  • From any phone dial the extension number of SMART PA TELEPHONE. It will connect automatically and acknowledge with a BEEP TONE.
  • Announce after the hearing the BEEP TONE.
  • Communication will be in PRIVATE MODE when called party lifts the receiver.
  • Replacing the receiver on cradle will reset the SMART PA TELEPHONE.

VERSATILE APPLICATIONS: -

  • Cement Plants.
  • Mines.
  • Petrochemical Refineries.
  • Chemical Plants.
  • Construction Sites.
  • Steel Plants.
  • Spinning Yarns
  • Fertilizer Plants.
  • Sugar Mills.
  • Power Generation Facilities
  • Pulp & Paper Mills
  • Food Processing Plant
  • Warehouses
  • Recreation Facilities
  • Hydroelectric Facilities
  • Drilling Rigs
  • Ammonia Storage Area
  • Process industries
  • ANY LARGE AND MEDIUM SCALE INDUSTRIAL UNITS.

ACCESSORIES AND OPTIONS: -

  • External indoor speaker Box.
  • Color selection (subject to minimum quantities).

SMART CHOICE: -

  • Simple Installation.
  • Simple Operation.
  • One-piece waterproof non-tactile keypad.
  • Magnetic reed hook-switch reduces moving parts subject to wear.
  • 16-gauge rugged steel powder coated construction.
  • Heavy industrial ABS handset & SS cord.
  • Noise-canceling type microphone.
  • Auto disconnection to free line for next call.
  • A service temperature range from 0 to +60 o C.
  • Encapsulated circuit boards impervious to water and condensation.
  • Environment Protected.
  • Single PCB design for plug & play operation.
  • Easy troubleshooting ensuring minimum downtime.

PA - Technical Specifications

TECHNICAL SPECIFICATIONS
 
ELECTRICAL REQUIREMENT:-
 
 
 
POWER SOURCE
 
220 VOLTS / 110 VOLTS AC (SWITCHABLE)
 
PHONE LINE
 
24 VOLTS (EPABX) / 50 VOLTS (TEL LINE)
 
POWER CONSUMPTION
 
< 35 WATTS
 
STAND BY CONSUMPTION
 
< 5 WATTS
 
AMPLIFIER
 
30 WATTS RMS.
 
INTERNAL AMPLIFIER
 
0.5 WATTS RMS. (VANDAL RESISTANT TYPE)
 
HORN SPEAKER
 
60 WATTS, 8 OHMS
 
INTERNAL SPEAKER 
3 WATTS (VANDAL RESISTANT TYPE)
 
HANDSET 
FOUR FEET STAINLESS STEEL ARMOUR TUBE (HANDSET TYPE ONLY)
 
INSULATION
 
600 V FOR 3 MIN BETWEEN POWER SOURCE & TELEPHONE LINE
 
RINGER VOLTAGE 
75 VAC (150 V PP)
 
MECHANICAL SPECIFICATIONS:-
 
 
 
DIMENSIONS
 
360 X 160 X 180 MM
 
WEIGHT 
5 KGS
 
CONSTRUCTION 
16 GAUGE POWDER COATED STEEL BODY 
CRADLE
 
AL ALLOY WITH MAGNETIC REED SWITCH
 
HAND SET
 
HIGH IMPACT ABS(HANDSET TYPE ONLY)
 
STANDARD MOUNTING
 
VERTICAL WALL/PANEL
 
MICROPHONE
 
NOISE CANCELING DYNAMIC
 
ENVIRONMENTAL:-
 
 
 
MOISTURE RESISTANCE
 
0 TO 95%HUMIDITY WITH PCB CONFORMAL COATED
 
TEMPERATURE RANGE
 
0 TO +60C
 
DUST RESISTANCE
 
FULLY GASKETTED ENCLOSURE