PA Communication System

SMART INDUSTRIAL PA COMMUNICATION SYSTEM (BLOCKING TYPE)MODEL MCS-V


FEATURES: -

  • Master Control system.
  • 3 core cable from FS to MCS
  • Individual location, ZONE and all CALL page channels
  • Distributed Amplifier concept based Master Control system
  • Direct instant Communications between control room operator and field unit
  • Communication between different field stations with the assistance of control room operator only
  • Individual zone selection and all zone (all-call) selection switch in operator console
  • No limitation for the number of FS in each zone
  • Highest priority for all-call paging
  • No need to press any button to receive a call just lift handset of the field station and talk
  • Fault finding very easy as no multiple speakers spread over an area to search.
  • Field stations single PCB design making replacement simple and easy.
  • More than one speaker’s can be connected to a field station by using SMART EXTERNAL AMPLIFIER
  • Fault finding very easy as no multiple speakers spread over an area to search
  • Replacement is very simple: - just replace the card of faulty FS or remove it from the network.
SMART INDUSTRIAL PA COMMUNICATION SYSTEM (NON BLOCKING TYPE)MODEL MCS-II


FEATURES: -

  • Multiple page channel's.
  • Multiple private intercom channel’s
  • Single code all page call from field
  • Single code private line communication after zone / all page call
  • Dial keypad for selective paging
  • Distributed amplifier design concept.
  • Any number of loudspeaker’s can be connected to a SMART PA TELEPHONE by using external amplifiers.
  • System designed for 12 zones
  • Upto 12 PA TELEPHONE in each zone.
  • Any PA TELEPHONE can be included in multiple zones.
  • SMART PA TELEPHONE model WMHS-II , WMHF-II used as field units.
  • No need of high power amplifiers
  • No need of bulky relay based loudspeaker controllers.
  • No need of 19” equipment rack.
  • Software programmable zone and all call feature
  • Uni directional paging call to all SMART PA TELEPHONE’S.
  • Uni directional paging call to SMART PA TELEPHONE in a zone.
  • Bi directional paging call to individual SMART PA TELEPHONE.
  • Operating voltage 220 v / 110 v ac for SMART PA TELEPHONE / OPERATOR CONSOLES / MCS II.
  • Direct access switch for various zones and all call from OC.
  • Keypad for selective paging from OC.
  • Additional external smart alarm unit for various user defined pre programmed alarms.
  • Simultaneous multi page calls from different locations.
  • Easy expansion requiring no hardware change.
  • Individual unit in multiple zones possible.
  • To increase the number of loud speakers in a SMART PA TELEPHONE, external amplifiers are required. The amplifier will be driven by a PA TELEPHONE.

PA Communication System - Blocking Type ( MODEL MCS V )

SMART INDUSTRIAL PA COMMUNICATION SYSTEM ( MODEL MCS V ) provides communication in industrial environments and hazardous locations where the communication is under total control of the Operator in control Room.
Individual locations can be paged only from Operator console and two or more persons can communicate if allowed by the Operator. The Field station call to the operator is indicated by a flashing LED and buzzer at the MCS.It is essential for organizations requiring communication between the control room operators and the field stations only.

SMART INDUSTRIAL PA COMMUNICATION SYSTEM consists of two modules:-

MASTER CONTROL STATION (MCS): -

  • Indoor wall mountable type/desk top type

  • Consists of all call-paging card

  • Zone call paging card

  • Extension cards

  • Power supply card

  • Activator card

  • Connectivity to field stations

  • Connectivity to each zone

  • User defined zones

SMART FIELD STATION (FS): -

  • Individual amplifier based
  • 16- Gauge enclosure with Integrated canopy design
  • Heavy ABS industrial handset, mechanically noise-canceling type
  • A magnetic reed hook-switch with no moving parts
  • Pilfer proof VANDAL RESISTANT type stations for destructive areas


SMART CHOICE: -

  • Distributed Amplifier concept based Master Control system
  • Individual field location page and all location page call from Operator Console
  • Direct instant Communications between control room operator and field unit
  • Communication between different field stations with the assistance of control room operator only
  • Individual zone selection and all zone (all-call) selection switch in operator console
  • No limitation for the number of FS in each zone
  • Highest priority for all-call paging
  • No need to press any button to receive a call just lift handset of the field station and talk
  • Fault finding very easy as no multiple speakers spread over an area to search
  • Field stations single PCB design making replacement simple and easy.
  • More than one speaker?s can be connected to a field station by using SMART EXTERNAL AMPLIFIER

 

 

PA Communication System - Non Blocking Type ( MODEL MCS II )

  • 4299 reads

PA_System_Communication_Non_Blocking_Type_300

SMART INDUSTRIAL PA SYSTEM (MODEL MCS II) Distributed Amplifier Design Concept INDUSTRIAL PA SYSTEM with unique features of MULTIPLE PAGE CHANNELS & PRIVATE INTERCOM CHANNELS for Paging and talkback facility.

The system allows for locating individuals anywhere in the plant by using the Individual location paging, zone paging & ALL call paging feature. Multiple Private Intercom Channel allows two way private Communications. The PLANT EPABX Interface allows user to make and receive telephone calls to and from the outside world.
SMART INDUSTRIAL PA SYSTEM is essential for growing organizations because of its unique features, flexibility and compatibility with PLANT EPABX (The backbone of every establishment communication.)

MULTIPLE PAGE CHANNEL: This feature is used for:-

  • Multi Channel SMART PA TELEPHONE Paging.
  • Simultaneous Different Zone Page Call From Multiple Locations.
  • All Call paging.
  • The SMART PA Telephones in an area formed as Zones.
  • Upto 12 Zones.
  • Locating and contacting people in a Particular location, zone or all over the plant.

MULTIPLE PRIVATE INTERCOM CHANNEL: This feature is used for:-

  • Multi Channel point to point communication.
  • Selective communication by dialing individual access code.
  • Talk back after Individual / zone & All Call page by called person in private mode.

SMART CHOICE:-

  • Multiple Page Channel's.
  • Multiple Private Intercom Channel's.
  • Single Code All Page Call From Field.
  • Single Code Private Line Communication After Zone / All Page Call.
  • Dial Keypad For Selective Paging.
  • Distributed Amplifier Design Concept.
  • Any Number Of Loudspeaker's Can be Connected To A SMART PA Telephone by using SMART External Amplifiers.
  • System Designed For 12 Zones.
  • Upto 12 SMART PA Telephone in Each Zone.
  • Any PA Telephone can be included in Multiple Zones.
  • SMART PA Telephone Model WMHS-II , WMHF-II Used as Field Units.
  • No Need Of High Power Amplifiers.
  • No Need Of Bulky Relay Based Loudspeaker Controllers.
  • NO Need Of 19” Equipment Rack.
  • Software Programmable Zone And All Call Feature.
  • Uni Directional Paging Call To All SMART PA Telephones.
  • UNI Directional Paging Call To SMART PA Telephones in a Zone.
  • BI Directional Paging Call To Individual SMART PA Telephone.
  • Operating Voltage 220 V / 110 V AC For SMART PA Telephones / Operator Consoles / MCS II.
  • Direct Access Switch For Various Zones And All Call From OC.
  • Keypad For Selective Paging From OC.
  • Additional External SMART Alarm Unit For Various User Defined PRE Programmed Alarms.
  • Simultaneous Multi Page Calls From Different Locations.
  • Easy Expansion Requiring No Hardware Change.
  • Individual Unit in Multiple Zones Possible.
  • To Increase the Number Of Loud Speakers in a SMART PA Telephone, SMART External Amplifiers are Required. the Amplifier will be Driven by a PA Telephone.